dmesg - Intel UHD 630 - Intel Core i7-9750H
microcode: microcode updated early to revision 0xd6, date = 2020-04-27
Linux version 5.7.0-999-generic (kernel@tangerine) (gcc version 9.3.0 (Ubuntu 9.3.0-13ubuntu1), GNU ld (GNU Binutils for Ubuntu) 2.34) #202005302200 SMP Sun May 31 02:03:21 UTC 2020
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000067457fff] usable
BIOS-e820: [mem 0x0000000067458000-0x0000000067d57fff] reserved
BIOS-e820: [mem 0x0000000067d58000-0x000000007df6efff] usable
BIOS-e820: [mem 0x000000007df6f000-0x000000007f59efff] reserved
BIOS-e820: [mem 0x000000007f59f000-0x000000007fc8efff] ACPI NVS
BIOS-e820: [mem 0x000000007fc8f000-0x000000007fd0efff] ACPI data
BIOS-e820: [mem 0x000000007fd0f000-0x000000007fd0ffff] usable
BIOS-e820: [mem 0x000000007fd10000-0x000000008d7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000008707fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x64940018-0x6495fe57] usable ==> usable
e820: update [mem 0x64940018-0x6495fe57] usable ==> usable
e820: update [mem 0x6492f018-0x6493f057] usable ==> usable
e820: update [mem 0x6492f018-0x6493f057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000006492f017] usable
reserve setup_data: [mem 0x000000006492f018-0x000000006493f057] usable
reserve setup_data: [mem 0x000000006493f058-0x0000000064940017] usable
reserve setup_data: [mem 0x0000000064940018-0x000000006495fe57] usable
reserve setup_data: [mem 0x000000006495fe58-0x0000000067457fff] usable
reserve setup_data: [mem 0x0000000067458000-0x0000000067d57fff] reserved
reserve setup_data: [mem 0x0000000067d58000-0x000000007df6efff] usable
reserve setup_data: [mem 0x000000007df6f000-0x000000007f59efff] reserved
reserve setup_data: [mem 0x000000007f59f000-0x000000007fc8efff] ACPI NVS
reserve setup_data: [mem 0x000000007fc8f000-0x000000007fd0efff] ACPI data
reserve setup_data: [mem 0x000000007fd0f000-0x000000007fd0ffff] usable
reserve setup_data: [mem 0x000000007fd10000-0x000000008d7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000008707fffff] usable
efi: EFI v2.60 by INSYDE Corp.
efi: ACPI=0x7fd0e000 ACPI 2.0=0x7fd0e014 TPMFinalLog=0x7f595000 SMBIOS=0x7e322000 SMBIOS 3.0=0x7e320000 ESRT=0x7e323698 MEMATTR=0x6e32f018 RNG=0x7e31d998 TPMEventLog=0x67d68018
efi: seeding entropy pool
random: fast init done
SMBIOS 3.0.1 present.
DMI: Notebook P95_96_97Ex,Rx /P95_96_97Ex,Rx , BIOS 1.07.13MIN29 10/01/201
tsc: Detected 2600.000 MHz processor
tsc: Detected 2599.992 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x870800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008A000000 mask 7FFE000000 uncachable
5 base 0089000000 mask 7FFF000000 uncachable
6 base 2000000000 mask 6000000000 uncachable
7 base 1000000000 mask 7000000000 uncachable
8 base 4000000000 mask 4000000000 uncachable
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7fd10 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007e323698 to 0x000000007e323720.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x630201000, 0x630201fff] PGTABLE
BRK [0x630202000, 0x630202fff] PGTABLE
BRK [0x630203000, 0x630203fff] PGTABLE
BRK [0x630204000, 0x630204fff] PGTABLE
BRK [0x630205000, 0x630205fff] PGTABLE
BRK [0x630206000, 0x630206fff] PGTABLE
BRK [0x630207000, 0x630207fff] PGTABLE
BRK [0x630208000, 0x630208fff] PGTABLE
BRK [0x630209000, 0x630209fff] PGTABLE
BRK [0x63020a000, 0x63020afff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x31f88000-0x34fa1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007FD0E014 000024 (v02 INSYDE)
ACPI: XSDT 0x000000007FCBE188 0000DC (v01 INSYDE CNLH 00000001 01000013)
ACPI: FACP 0x000000007FCF3000 00010C (v05 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: DSDT 0x000000007FCC0000 02F232 (v02 INSYDE CNLH 00000000 ACPI 00040000)
ACPI: FACS 0x000000007FC0D000 000040
ACPI: SSDT 0x000000007FD0B000 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000007FD07000 0031F3 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000007FD05000 001883 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FD03000 000781 (v01 INTEL Tpm2Tabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCFC000 004A41 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCF8000 00166A (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCF5000 000444 (v02 Intel PerfTune 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCBA000 0036B7 (v01 Insyde NvdTable 00001000 INTL 20160422)
ACPI: UEFI 0x000000007FD0D000 000236 (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: UEFI 0x000000007FD04000 000042 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: TPM2 0x000000007FD02000 000034 (v04 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: LPIT 0x000000007FCFB000 00005C (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: WSMT 0x000000007FCFA000 000028 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: DBGP 0x000000007FCF7000 000034 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: DBG2 0x000000007FCF6000 000061 (v00 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: ASF! 0x000000007FCF4000 0000A5 (v32 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: HPET 0x000000007FCF2000 000038 (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: APIC 0x000000007FCF1000 00012C (v03 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: MCFG 0x000000007FCF0000 00003C (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: DMAR 0x000000007FCBF000 0000A8 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: FPDT 0x000000007FCB9000 000044 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: BGRT 0x000000007FCB8000 000038 (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000008707fffff]
NODE_DATA(0) allocated [mem 0x8707d6000-0x8707fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000008707fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000067457fff]
node 0: [mem 0x0000000067d58000-0x000000007df6efff]
node 0: [mem 0x000000007fd0f000-0x000000007fd0ffff]
node 0: [mem 0x0000000100000000-0x00000008707fffff]
Zeroed struct page in unavailable ranges: 41458 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000008707fffff]
On node 0 totalpages: 8314382
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7962 pages used for memmap
DMA32 zone: 509552 pages, LIFO batch:63
Normal zone: 121888 pages used for memmap
Normal zone: 7800832 pages, LIFO batch:63
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics memory at [mem 0x89800000-0x8d7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x6db1b000-0x6dc7afff] usable ==> reserved
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x6492f000-0x6492ffff]
PM: hibernation: Registered nosave memory: [mem 0x6493f000-0x6493ffff]
PM: hibernation: Registered nosave memory: [mem 0x64940000-0x64940fff]
PM: hibernation: Registered nosave memory: [mem 0x6495f000-0x6495ffff]
PM: hibernation: Registered nosave memory: [mem 0x67458000-0x67d57fff]
PM: hibernation: Registered nosave memory: [mem 0x6db1b000-0x6dc7afff]
PM: hibernation: Registered nosave memory: [mem 0x7df6f000-0x7f59efff]
PM: hibernation: Registered nosave memory: [mem 0x7f59f000-0x7fc8efff]
PM: hibernation: Registered nosave memory: [mem 0x7fc8f000-0x7fd0efff]
PM: hibernation: Registered nosave memory: [mem 0x7fd10000-0x8d7fffff]
PM: hibernation: Registered nosave memory: [mem 0x8d800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
PM: hibernation: Registered nosave memory: [mem 0xff600000-0xffffffff]
[mem 0x8d800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 8184447
Policy zone: Normal
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 32442568K/33257528K available (14339K kernel code, 2536K rwdata, 5272K rodata, 2620K init, 4944K bss, 814960K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=1
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 45582 entries in 179 pages
ftrace: allocated 179 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200326
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007f574000 end: 0x0000007f593fff
DMAR: RMRR base: 0x00000089000000 end: 0x0000008d7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=10399968)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6
MDS CPU bug present and SMT on, data leak possible. See for more details.
#7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (62399.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7f59f000-0x7fc8efff] (7274496 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 21:49:15, date: 2020-09-15
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1600206555.052:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BC5E200 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160422)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BC08000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BE45800 000581 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BC8B800 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BE46000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BE44800 0005FC (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BC09C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54C52B000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AC54BC0A800 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x8d800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb5000000-0xb5ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb4610000-0xb4617fff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xb4624000-0xb4624fff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb4600000-0xb460ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xb4620000-0xb4621fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xb4625000-0xb4625fff 64bit]
pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
pci 0000:00:14.3: reg 0x10: [mem 0xb4618000-0xb461bfff 64bit]
pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb4628000-0xb4628fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xb4622000-0xb4623fff]
pci 0000:00:17.0: reg 0x14: [mem 0xb462c000-0xb462c0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xb462b000-0xb462b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a32c] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.6: [8086:a336] type 01 class 0x060400
pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.6: PTM enabled (root), 4ns granularity
pci 0000:00:1d.7: [8086:a337] type 01 class 0x060400
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xb461c000-0xb461ffff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xb4200000-0xb42fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xb4629000-0xb46290ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10de:1f11] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.1: [10de:10f9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xb4000000-0xb4003fff]
pci 0000:01:00.2: [10de:1ada] type 00 class 0x0c0330
pci 0000:01:00.2: reg 0x10: [mem 0xb4100000-0xb413ffff 64bit pref]
pci 0000:01:00.2: reg 0x1c: [mem 0xb4140000-0xb414ffff 64bit pref]
pci 0000:01:00.2: PME# supported from D0 D3hot
pci 0000:01:00.3: [10de:1adb] type 00 class 0x0c8000
pci 0000:01:00.3: reg 0x10: [mem 0xb4004000-0xb4004fff]
pci 0000:01:00.3: PME# supported from D0 D3hot
pci 0000:00:01.0: PCI bridge to [bus 01-05]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb40fffff]
pci 0000:00:01.0: bridge window [mem 0xb4100000-0xb41fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [144d:a808] type 00 class 0x010802
pci 0000:07:00.0: reg 0x10: [mem 0xb4500000-0xb4503fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 07]
pci 0000:00:1d.0: bridge window [mem 0xb4500000-0xb45fffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:08:00.0: reg 0x18: [mem 0xb4404000-0xb4404fff 64bit]
pci 0000:08:00.0: reg 0x20: [mem 0xb4400000-0xb4403fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.6: PCI bridge to [bus 08]
pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.6: bridge window [mem 0xb4400000-0xb44fffff]
pci 0000:09:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:09:00.0: reg 0x14: [mem 0xb4300000-0xb4300fff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1d.7: PCI bridge to [bus 09]
pci 0000:00:1d.7: bridge window [mem 0xb4300000-0xb43fffff]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x17
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6492f018-0x67ffffff]
e820: reserve RAM buffer [mem 0x64940018-0x67ffffff]
e820: reserve RAM buffer [mem 0x67458000-0x67ffffff]
e820: reserve RAM buffer [mem 0x6db1b000-0x6fffffff]
e820: reserve RAM buffer [mem 0x7df6f000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fd10000-0x7fffffff]
e820: reserve RAM buffer [mem 0x870800000-0x873ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:00: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:00: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:00: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: disabling [io 0x3322-0x3323] because it overlaps 0000:00:1d.6 BAR 13 [io 0x3000-0x3fff]
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:07: [mem 0xfe037000-0xfe037fff] has been reserved
system 00:07: [mem 0xfe036008-0xfe036fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:15.0: BAR 0: assigned [mem 0x8d800000-0x8d800fff 64bit]
pci 0000:00:15.1: BAR 0: assigned [mem 0x8d801000-0x8d801fff 64bit]
pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-05]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb40fffff]
pci 0000:00:01.0: bridge window [mem 0xb4100000-0xb41fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 06]
pci 0000:00:1d.0: PCI bridge to [bus 07]
pci 0000:00:1d.0: bridge window [mem 0xb4500000-0xb45fffff]
pci 0000:00:1d.6: PCI bridge to [bus 08]
pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.6: bridge window [mem 0xb4400000-0xb44fffff]
pci 0000:00:1d.7: PCI bridge to [bus 09]
pci 0000:00:1d.7: bridge window [mem 0xb4300000-0xb43fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x8d800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa0000000-0xb40fffff]
pci_bus 0000:01: resource 2 [mem 0xb4100000-0xb41fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xb4500000-0xb45fffff]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xb4400000-0xb44fffff]
pci_bus 0000:09: resource 1 [mem 0xb4300000-0xb43fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
fbcon: Taking over console
Freeing initrd memory: 49256K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x792c0000-0x7d2c0000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 122
pcieport 0000:00:1b.0: PME: Signaling with IRQ 123
pcieport 0000:00:1b.0: AER: enabled with IRQ 123
pcieport 0000:00:1b.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
pcieport 0000:00:1d.0: AER: enabled with IRQ 124
pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.6: PME: Signaling with IRQ 125
pcieport 0000:00:1d.6: AER: enabled with IRQ 125
pcieport 0000:00:1d.6: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.7: PME: Signaling with IRQ 126
pcieport 0000:00:1d.7: AER: enabled with IRQ 126
pcieport 0000:00:1d.7: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x90000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.5.1 model 0x9E
intel_idle: Local APIC timer is reliable in all C-states
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Invalid active0 threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (30 C)
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb3: SerialNumber: 0000:01:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb4: SerialNumber: 0000:01:00.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
battery: ACPI: Battery Slot [BAT0] (battery present)
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2020-09-15T21:49:17 UTC (1600206557)
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
intel_pmc_core intel_pmc_core.0: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x20, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2498784973, 8980520)->(2543230821, -35465328)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e62f0c25928c18f7fab76efb1e42b6b7e97acd1a'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:163:854
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2620K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 872K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.7.0-999-generic
usb 1-8: new high-speed USB device number 2 using xhci_hcd
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
tsc: Refined TSC clocksource calibration: 2591.995 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb206edb, max_idle_ns: 440795262788 ns
clocksource: Switched to clocksource tsc
ahci 0000:00:17.0: version 3.0
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x10 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
nvme nvme0: pci function 0000:07:00.0
idma64 idma64.0: Found Intel integrated DMA 64-bit
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xb462b000 port 0xb462b300 irq 131
libphy: r8169: probed
r8169 0000:08:00.0 eth0: RTL8168h/8111h, 80:fa:5b:6c:04:84, XID 541, IRQ 145
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
nvme nvme0: 12/0/0 default/read/poll queues
nvme0n1: p1 p2
r8169 0000:08:00.0 enp8s0: renamed from eth0
usb 1-8: New USB device found, idVendor=04f2, idProduct=b685, bcdDevice=54.04
usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-8: Product: Chicony USB2.0 Camera
usb 1-8: Manufacturer: Sonix Technology Co., Ltd.
usb 1-10: new full-speed USB device number 3 using xhci_hcd
ata5: SATA link down (SStatus 4 SControl 300)
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
usb 1-10: New USB device found, idVendor=06cb, idProduct=00c7, bcdDevice= 0.00
usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-10: SerialNumber: bb30898c21e3
usb 1-14: new full-speed USB device number 4 using xhci_hcd
usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
psmouse serio2: synaptics: queried max coordinates: x [..5662], y [..4730]
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
psmouse serio2: synaptics: queried min coordinates: x [1278..], y [1122..]
psmouse serio2: synaptics: Your touchpad (PNP: PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
lp: driver loaded but no devices found
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
ppdev: user-space parallel port driver
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1880...
systemd[1]: Mounting Mount unit for core18, revision 1885...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 33...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1502...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for snap-store, revision 454...
systemd[1]: Mounting Mount unit for snap-store, revision 467...
systemd[1]: Mounting Mount unit for snapd, revision 8140...
systemd[1]: Mounting Mount unit for snapd, revision 8790...
psmouse serio2: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x2e800/0x500000, board id: 3449, fw id: 2864695
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started Journal Service.
systemd-journald[404]: Received client request to flush runtime journal.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
input: Intel HID events as /devices/platform/INT33D5:00/input/input13
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
cfg80211: Loading compiled-in X.509 certificates for regulatory database
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
mc: Linux media interface: v0.10
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
videodev: Linux video capture interface: v2.00
cryptd: max_cpu_qlen set to 1000
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
iwlwifi 0000:00:14.3: WRT: Overriding region id 1
iwlwifi 0000:00:14.3: WRT: Overriding region id 2
iwlwifi 0000:00:14.3: WRT: Overriding region id 3
iwlwifi 0000:00:14.3: WRT: Overriding region id 4
iwlwifi 0000:00:14.3: WRT: Overriding region id 6
iwlwifi 0000:00:14.3: WRT: Overriding region id 8
iwlwifi 0000:00:14.3: WRT: Overriding region id 9
iwlwifi 0000:00:14.3: WRT: Overriding region id 10
iwlwifi 0000:00:14.3: WRT: Overriding region id 11
iwlwifi 0000:00:14.3: WRT: Overriding region id 15
iwlwifi 0000:00:14.3: WRT: Overriding region id 16
iwlwifi 0000:00:14.3: WRT: Overriding region id 18
iwlwifi 0000:00:14.3: WRT: Overriding region id 19
iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:00:14.3: Found debug configuration: 0
iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
iwlwifi 0000:00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
uvcvideo: Found UVC 1.00 device Chicony USB2.0 Camera (04f2:b685)
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
Bluetooth: hci0: Device revision is 2
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
checking generic (90000000 7e9000) vs hw (b5000000 1000000)
checking generic (90000000 7e9000) vs hw (90000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
input: Chicony USB2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200326/nsarguments-59)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200326/nsarguments-59)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau: detected PR support, will not use DSM
nouveau 0000:01:00.0: enabling device (0106 -> 0107)
nouveau 0000:01:00.0: NVIDIA TU106 (166000a1)
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
iwlwifi 0000:00:14.3: base HW address: 3c:f0:11:fe:05:79
nouveau 0000:01:00.0: bios: version 90.06.2d.00.b5
nouveau 0000:01:00.0: fb: 6144 MiB GDDR6
[TTM] Zone kernel: Available graphics memory: 16295156 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
nouveau 0000:01:00.0: DRM: BIT table 'A' not found
nouveau 0000:01:00.0: DRM: BIT table 'L' not found
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.1
nouveau 0000:01:00.0: DRM: DCB outp 00: 01800f36 04600010
nouveau 0000:01:00.0: DRM: DCB outp 01: 01800f32 00020010
nouveau 0000:01:00.0: DRM: DCB outp 02: 04844f76 04600010
nouveau 0000:01:00.0: DRM: DCB outp 03: 04844f72 00020010
nouveau 0000:01:00.0: DRM: DCB outp 04: 02022f52 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001046
nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
nouveau 0000:01:00.0: DRM: DCB conn 04: 01000446
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone6: failed to read out thermal zone (-61)
iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
audit: type=1400 audit(1600206560.051:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=677 comm="apparmor_parser"
audit: type=1400 audit(1600206560.051:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=682 comm="apparmor_parser"
audit: type=1400 audit(1600206560.051:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=686 comm="apparmor_parser"
audit: type=1400 audit(1600206560.051:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=681 comm="apparmor_parser"
audit: type=1400 audit(1600206560.051:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=680 comm="apparmor_parser"
audit: type=1400 audit(1600206560.051:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=680 comm="apparmor_parser"
audit: type=1400 audit(1600206560.055:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=679 comm="apparmor_parser"
audit: type=1400 audit(1600206560.055:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1600206560.055:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=687 comm="apparmor_parser"
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
nvidia-gpu 0000:01:00.3: i2c timeout error e0000000
ucsi_ccg 0-0008: i2c_transfer failed -110
ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
ucsi_ccg: probe of 0-0008 failed with error -110
r8169 0000:08:00.0 enp8s0: Link is Down
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1478720 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 12647 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
NET: Registered protocol family 38
[drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input21
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input22
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
vga_switcheroo: enabled
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
wlp0s20f3: authenticate with d8:6c:63:df:fc:f5
wlp0s20f3: send auth to d8:6c:63:df:fc:f5 (try 1/3)
wlp0s20f3: authenticated
wlp0s20f3: associate with d8:6c:63:df:fc:f5 (try 1/3)
wlp0s20f3: RX AssocResp from d8:6c:63:df:fc:f5 (capab=0x1011 status=0 aid=1)
wlp0s20f3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:6c:63:df:fc:f5
rfkill: input handler disabled
rfkill: input handler enabled
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
rfkill: input handler disabled
kauditd_printk_skb: 26 callbacks suppressed
audit: type=1400 audit(1600206580.395:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/9279/usr/lib/snapd/snap-confine" pid=2387 comm="apparmor_parser"
audit: type=1400 audit(1600206580.395:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/9279/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2387 comm="apparmor_parser"
audit: type=1400 audit(1600206580.787:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.snap-store" pid=2389 comm="apparmor_parser"
audit: type=1400 audit(1600206580.787:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=2406 comm="apparmor_parser"
audit: type=1400 audit(1600206580.787:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.snap-store" pid=2405 comm="apparmor_parser"
audit: type=1400 audit(1600206580.787:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=2407 comm="apparmor_parser"
audit: type=1400 audit(1600206582.635:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/9279/usr/lib/snapd/snap-confine" pid=2591 comm="apparmor_parser"
audit: type=1400 audit(1600206582.655:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/9279/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2591 comm="apparmor_parser"
audit: type=1400 audit(1600206582.655:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=2595 comm="apparmor_parser"
audit: type=1400 audit(1600206582.655:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.snap-store" pid=2594 comm="apparmor_parser"
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: avx2x4 gen() 46316 MB/s
raid6: avx2x4 xor() 21740 MB/s
raid6: avx2x2 gen() 50465 MB/s
raid6: avx2x2 xor() 27272 MB/s
raid6: avx2x1 gen() 39437 MB/s
raid6: avx2x1 xor() 24433 MB/s
raid6: sse2x4 gen() 20130 MB/s
raid6: sse2x4 xor() 11471 MB/s
raid6: sse2x2 gen() 20419 MB/s
raid6: sse2x2 xor() 12229 MB/s
raid6: sse2x1 gen() 16827 MB/s
raid6: sse2x1 xor() 8720 MB/s
raid6: using algorithm avx2x2 gen() 50465 MB/s
raid6: .... xor() 27272 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
wlp0s20f3: disconnect from AP d8:6c:63:df:fc:f5 for new auth to b0:2a:43:cd:3d:21
wlp0s20f3: authenticate with b0:2a:43:cd:3d:21
wlp0s20f3: send auth to b0:2a:43:cd:3d:21 (try 1/3)
wlp0s20f3: authenticated
wlp0s20f3: associate with b0:2a:43:cd:3d:21 (try 1/3)
wlp0s20f3: RX ReassocResp from b0:2a:43:cd:3d:21 (capab=0x1011 status=0 aid=5)
wlp0s20f3: associated
wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by b0:2a:43:cd:3d:21
perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3143 > 3140), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3930 > 3928), lowering kernel.perf_event_max_sample_rate to 50750
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset